溫度保險絲術語解釋

發布時間：2018-12-17 10:08:54 丨 瀏覽次數：

溫度保險絲術語解釋/EXPLANATION OF TERMS

¤ TF-額定動作溫度/TF-Rated functioning temperature

在僅通以不超過10mA的探測電流的條件下，測得的使熱熔斷體導電狀態改變的溫度。

Temperature of the thermal-link which causes it to change its state of conductivity with a detection up to 10mA as the only ｌｏａｄ.

¤ 實測動作溫度/Fusing-off temperature 

產品放置油槽內并通過以不超過100mA電流值，然后以0.5K/min 至1K/min 的速度穩定升溫，熱熔斷體實際動作溫度體。

The fusing-off temperature indicates value measured in the test oil bath and temperature be increased steadily with a rate of rise between 0.5K/min to 1K/min and detective current 0.1 ampere ｏｒ less.

¤ TH-保持溫度/TH-Holding temperature

熱熔斷體在規定的條件下通過額定電流且保溫168小時，其導電狀態不發生改變的最高溫度值或按IEC60691標準測試值。

The maximum temperature at which a thermal-links will not cause a change in start of conductivity to open circuit while conducting rated current for 168 hours ｏｒ according to IEC60691.

¤ TM-最高極限溫度/TM-Maximun temperature limit

由制造廠規定的溫度，在此溫度下熱熔斷體（溫度保險絲）導電狀態已改變，但其機械性能和電氣性能在規定的時間內不致減弱。

Temperature of the thermal-link stated by the manufacturer, Up to which the machanical and electrical properties of the thermal-link, Having changed its state of conductivity , Will not beimpaired for a given time.

¤ 熔斷器盒/Fusr-holder

熔斷器底座和熔斷器承載體的組合件。

Combination of a fuse-bade whith its fuse-carrier.

¤ 小型熔斷器/Miniature fuse

其中的熔斷元件是小型熔斷體的一種熔斷器。

Fuse in which the fuse-link is a miniature fuse-link.